吉米热风缝口密封机JM-3

使用微信扫描二维码分享朋友圈，成交更快更简单！

吉米热风缝口密封机JM-3

型号：JM-3
==产品特点==
1.触摸显示操控，采用集成芯片，使本机动作更稳定，动作更灵敏，质量更可靠，所有参数都在液晶显示屏里，操作十分方便。
2.自动温度控制，稳定性高，温度±1℃，温度上限设置，保护发热丝。
3.上下压轮同步传动，自动补偿调节虚位，自动微退功能减少压带空白.
4.上压轮气缸采用超薄可调节气缸，可对用户加工厚薄布料进行压力调节，防止压坏布料和压出布边有痕迹，解决了同类机器直压到底的缺陷。
5.发热枪供风选用自然高压鼓风机供及发热管之用，避免了常规用高压泵之气源的水分冲击发热内管，使之更加。
==技术参数==
型号 JM-3
电源 AC220V 50Hz
额定功率 2500W
温度控制 无段可调 常温～700℃
速度 1～22m/min 无段变速
压缩空气 0.35～0.5Mpa
压轮宽度 光面25mm标准型，其它如网纹，直纹等可自由选择
可吹胶带宽度 标准型14mm～22mm,其它宽度根据客户自由选择
上压轮升降距离 18mm～25mm
外型尺寸 长1300x宽550x高1650
净重 160kg
缝合跳漏防止: 在热风管与滚轮启动停止与热风管摆动之间均有可供利用调节以防止封口的跳漏
Model: JM-3
Features:
1.TSI operating procedure with integrated chip,more stable to use and more reliable quality, all parameters shows through programmable display and easy operation.
2.Automatic temperature control with high stability and precision can reach ±1℃,temperaure cap setting can protect heating tube.
3.Synchrodrive of upper and lower rollers,automatic adjust the virtual space and micro-recede to reduce the mistake.
4.The thin cylinder of upper roller can be adjusted according to your thin & thick fabrics, in order to protect materials and solve the problems of sealing straight of seam kind seam sealing machine.
5.High pressure air blower supply the air to heater and quiet. If suddenly power off, it can protect heater and prolong the service life of heater.
Technical parameter:
Model JM-3
Power AC220V 50Hz
Rated power 2500W
Temp control Up to 700℃
Speed 1～22m/min
Air compression 0.35～0.5Mpa
Width of roller Mill finish standard :25mm ,others can be choiced (ie:dictyonitic and ruled surface )
Adhesive tape width 14mm～22mm (standard) others can be choiced
Upper roller lift 18mm～25mm
Size (L×W×H) 1300x550x1650mm
Net weight 160kg
Sealing skip prevention There are adjustable devices to prevent the gun from jumping over the seamed sections when the gun is moving inward with the idle wheel starting,or when the gun moving outward with the idle wheel stopping.