智能桥架生产线厂家,电缆桥架设备厂家

使用微信扫描二维码分享朋友圈，成交更快更简单！

智能桥架生产线厂家,电缆桥架设备厂家

智能桥架生产线厂家,电缆桥架设备厂家，槽式电缆桥架

Trough cable bridge

1，槽式电缆桥架是一种全封闭型电缆桥架。它适用于敷设计算机电缆、通信电缆、热电偶电缆及其他高灵敏系统的控制电缆等。它对控制电缆的重腐蚀中环境电缆的防护都有较好的效果。梯级式、托盘式、槽式电缆桥架各自优缺点:梯级式汇线桥架具有良好的通风性能，不防尘、不防干扰。槽式、托盘式汇线桥架具有防尘、防干扰性能。

1. Trough cable bridge is a fully enclosed cable bridge. It is most suitable for laying computer cables, communication cables, thermocouple cables and other high sensitive control cables. It has good effect on shielding interference of control cables and protection of environmental cables in heavy corrosion. The advantages and disadvantages of cascade, tray and trough cable bridges are as follows: cascade cable bridges have good ventilation performance, no dust and no interference. The trough type and tray type bridge has the performance of dust and interference prevention.

2，当前大跨距电缆桥架一般是由拉挤玻璃钢型材组装而成，适用于电力电缆、控制电缆、照明电缆及配件等。与铁制桥架相比，具有使用寿命长(一般设计寿命为二十年)、安装方便且成本低(比重仅为碳钢的1/4，施工中无需动火，单根桥架长度可达8米，甚至更长)、切割方便、不需维护等性。

2. At present, the long-span cable bridge is generally assembled by extruded FRP profiles, which is suitable for power cables, control cables, lighting cables and accessories. Compared with the iron bridge, it has the advantages of long service life (generally designed for 20 years), convenient installation and low cost (the specific gravity is only 1/4 of carbon steel, no fire is needed in construction, the length of a single bridge can reach 8 meters, or even longer), convenient cutting and no maintenance.

3，组合式电缆桥架是一种新型桥架，是电缆桥架系列中的第二代产品。它适用各项工程、各种单位、各种电缆的敷设，它具有结构简单、配置灵活、安装方便、形式新颖等特点。

3. Composite cable bridge is a new type of bridge, which is the second generation product of cable bridge series. It is suitable for laying various projects, units and cables. It has the characteristics of simple structure, flexible configuration, convenient installation and novel form.

炜桦智能电缆桥架生产设备结构概述

Overview of the Structure of Production Equipment for Weibi Intelligent Cable Bridge Frame

全自动槽式电缆桥架成型生产线可生产槽式电缆桥架，不同规格的电缆桥架可通过更换冲模完成，辊弯机采用组合可调式，一套轧辊完成所有规格桥架产品，规格变化通过调整成型机开挡和轧辊完成。

Fully automatic trough cable bridge forming production line can produce trough cable bridge. Different specifications of cable bridge can be completed by replacing punch dies. Roller bender adopts combined adjustable type. A set of rollers can complete all specifications of bridge products. Specification changes can be completed by adjusting the opening of the forming machine and rollers.

电缆桥架生产设备性能

Performance of Production Equipment for Cable Bridge Frame

1, 可根据生产需要轧制个带钢宽度100mm≤§≤1100mm多种规格的电缆桥架。

1. A cable bridge with a width of 100 mm () less than 1100 mm can be rolled according to production requirements.

2, 在线冲孔冲劲时生产速度：6～10米/分钟。

2. On-line punching speed: 6-10 m/min.

3, 成型设备连续成型速度时：0～15米/分钟。

3. The continuous forming speed of the forming equipment is 0-15 m/min.

4, 生产线分自动和手动两种操作方式，可实现联动和分段运转作业。

4. The production line is divided into automatic and manual operation modes, which can realize linkage and sectional operation.