巢湖消防箱自动生产线消防箱生产设备消防箱全自动生产线消防箱箱体成型机厂家

使用微信扫描二维码分享朋友圈，成交更快更简单！

巢湖消防箱自动生产线 消防箱生产设备 消防箱全自动生产线 消防箱箱体成型机厂家
自动放料机—校平机—伺服送料机—冲孔部分—成型部分—定尺切断部分—自动折弯—收料台、机器人自动焊接，电气控制柜等部件组成。

Automatic feeder - leveler - servo feeder - punching part - forming part - fixed length cutting part - automatic bending - receiving table, robot automatic welding, electrical control cabinet and other components.

此生产线是生产配电柜的成型设备。待加工的带卷用行车借助人工放入放料架上，然后矫正、张紧，经动力调平后，进入液压预冲孔并冲缺口，由导向装置送入成形机进行工件的成形，在经成形辊及压力辊的磨擦阻尼作用下，以0-10m的线速度进入折弯部分后，产品按要求折四个边框并切断，再由人工打包运走。

This production line is a special forming equipment for the production of distribution cabinets. The coiled traveling crane to be processed is put on the feeding rack manually, then rectified and tensioned. After power leveling, it enters the hydraulic pre-punching hole and punches the notch. The guide device is fed into the forming machine to form the workpiece. Under the friction damping effect of the forming roll and the pressure roll, the product enters the bending part at a linear speed of 0-10m. After the product is folded and cut off according to the requirements, the product is then manually cut off. Pack and carry away.

一．主要技术参数

Main technical parameters

规格参数

Specification parameter

a. 适用材料： 冷轧卷板、镀锌卷板

Applicable materials: cold rolled and galvanized coils

b. 材料质量： 国产GB标准

B. Material Quality: Domestic GB Standard

c. 抗拉强度： δb≤780Mpa (Max.)

C. Tensile strength: delta B < 780 Mpa (Max.)

d. 屈服强度： δs≤510Mpa (Max.)

D. Yield strength: Delta s < 510 Mpa (Max.)

e. 材料厚度： 0.4-1.0mm

E. Material thickness: 0.4-1.0mm

f. 材料宽度： 150-500mm （Max.）

F. Material width: 150-500 mm (Max.)

g. 钢卷内径： Φ360mm-Φ510mm

G. Coil inner diameter: 360mm-510mm

h. 钢卷外径： Φ1250（Max.）

H. Outer diameter of coil: 1250 (Max.)

i. 钢卷重量： 5 t（Max.）

I. Coil weight: 5 t (Max.)

3、成型参数

3. Forming parameters

a、 成型组数：16组辊轮成型

A. Forming group: 16 sets of rollers forming

b、 主轴规格：?48mm 45#钢材料调质处理

B. Spindle specification:? 48mm 45# steel material tempering treatment

c、 辊轮材质：Gr12模具钢热处理

C. Roller Material: Heat Treatment of Gr12 Die Steel

d、 整体式牌坊：由25mm钢板精加工而成，孔距误差小于0.1mm

D. Integral archway: made of 25 mm steel plate, with hole spacing error less than 0.1 mm